Tonneau Cover Removal - Jeep GLADIATOR 2020 Owner's Manual

106 GETTING TO KNOW YOUR VEHICLE
7. Once the rear Tonneau Cover bar is
positioned over the locking mechanism,
grasp the back of the Tonneau Cover and
push downward on the center to engage the
locking mechanisms. Make sure an audible
"click" from both sides of the Tonneau
Cover are heard to confirm that the latch is
completely engaged.
Push Downward To Lock
NOTE:
If desired, the Tonneau Cover can be left in this
position (rear panel folded forward) while the
tailgate is closed, or the tailgate can be raised
to the mid-position. Refer to "Tailgate" in this
chapter for further information.
Tonneau Cover With Tailgate In Mid-Position
8. Fold the rear panel down; the tailgate can
now be raised and secured in place.
NOTE:
If not leaving the tailgate in the mid-position, the
Tonneau Cover must be closed completely prior
to fully closing the tailgate.
CAUTION!
Do not sit on the Tonneau Cover; damage to
the cover and/or cargo will occur.
T C R
ONNEAU OVER EMOVAL
To remove the Tonneau Cover, proceed as
follows:
1. Open the tailgate.
2. Fold the rear panel of the Tonneau Cover
forward to reveal the red release straps.
Release Strap Location