Jeep GLADIATOR 2020 Owner's Manual page 109

3. Pull one of the red release straps to release
the Tonneau Cover latch.
NOTE:
Pulling either strap will release the latches to
roll the Tonneau Cover up; there is no need to
pull both at the same time.
4. Roll the Tonneau Cover forward, starting
with the rear bar and continue to roll toward
the front of the truck bed.
Roll Tonneau Cover Forward
5. Using the stowage straps, secure the
Tonneau Cover in the rolled up position.
Secured Tonneau Cover
GETTING TO KNOW YOUR VEHICLE
6. Using a #T50 Torx head driver, remove the
two fasteners securing the Tonneau Cover
to the front of the truck bed.
Fastener Locations
7. Utilizing two people, lift the Tonneau Cover
up and away from the truck bed.
NOTE:
Be sure the Tonneau Cover has been
completely rolled up, and straps are secure,
before removing.
8. Store in a safe location.
107
2