Overtake Aid; Acc Operation At A Stop (Automatic Transmission Only); Adaptive Cruise Control (Acc) Menu - Jeep GLADIATOR 2020 Owner's Manual

236 STARTING AND OPERATING
Brake Alert
NOTE:
The "BRAKE!" screen in the instrument cluster
display is a warning for the driver to take action
and does not necessarily mean that the
Forward Collision Warning system is applying
the brakes autonomously.
O A
VERTAKE ID
When driving with ACC engaged and following a
vehicle, the system will provide an additional
acceleration up to the ACC set speed to assist in
passing the vehicle. This additional acceleration
is triggered when the driver utilizes the left turn
signal and will only be active when passing on
the left hand side.
ACC O A A S
PERATION T TOP
(A T
UTOMATIC RANSMISSION
In the event that the ACC system brings your
vehicle to a standstill while following a target
vehicle, your vehicle will resume motion without
the need for any driver action if the target
vehicle starts moving within two seconds of your
vehicle coming to a standstill.
If the target vehicle does not start moving within
two seconds of your vehicle coming to a
standstill, the ACC with Stop system will cancel
and the brakes will release. A cancel message
will display on the instrument cluster display
and produce a warning chime. Driver
intervention will be required at this moment.
If the driver seat belt is unbuckled or the driver
door is opened while ACC with Stop is holding
your vehicle at a standstill, the ACC with Stop
system will cancel and the brakes will release. A
cancel message will display on the instrument
cluster display and produce a warning chime.
Driver intervention will be required at this
moment.
O )
NLY
When the ACC system is resumed, the driver
must ensure that there are no pedestrians,
vehicles or objects in the path of the vehicle.
Failure to follow these warnings can result in
a collision and death or serious personal
injury.
A C
DAPTIVE
M
ENU
The instrument cluster display will show the
current ACC system settings. The instrument
cluster display is located in the center of the
instrument cluster. The information it displays
depends on ACC system status.
Push the Adaptive Cruise Control (ACC) on/off
button (located on the steering wheel) until one
of the following appears in the instrument
cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
WARNING!
C (ACC)
RUISE ONTROL