Jeep GLADIATOR 2020 Owner's Manual page 324

322 SERVICING AND MAINTENANCE
The A/C air filter is located in the fresh air inlet
behind the glove compartment. Perform the
following procedure to replace the filter:
1. Open the glove compartment and remove
all contents.
2. Push up on the glove compartment travel
stop and lower the door.
Glove Compartment Travel Stop
3. Pivot the glove compartment downward.
4. Disengage the two retaining tabs that
secure the air filter access door to the HVAC
housing.
Air Filter Retaining Tabs
5. Remove the air filter from the HVAC air inlet
housing. Pull the filter elements out
pinching them to the right for clearance.
Air Filter
6. Install the A/C air filter with the air filter
position indicators pointing in the same
direction as removal.
CAUTION!
The cabin air filter is identified with an arrow
to indicate airflow direction through the filter.
Failure to properly install the filter will result
in the need to replace it more often.
7. Close A/C air filter access door and secure
retaining tabs.
8. Rotate the glove compartment door back
into position, ensuring you have properly
engaged the travel damper.
Travel Dampener
1 — Travel Dampener Housing
2 — Travel Dampener Rod
Refer to the "Maintenance Plan" located in
"Scheduled Servicing" in this chapter for the
proper maintenance intervals.