Jeep GLADIATOR 2020 Owner's Manual page 437

4. Search for available devices on your
Bluetooth®-enabled mobile phone.
Press the Settings button on your mobile

phone.
Select Bluetooth® and ensure it is

enabled. Once enabled, the mobile
phone will begin to search for Bluetooth®
connections.
Pairing A Phone
If "No" is selected, and you still would like to
pair a mobile phone, press the "Phone Set-
tings" button from the Uconnect Phone
main screen.
Select "Paired Phones", and then press

the Add Device button on the touch-
screen.
Search for available devices on your

Bluetooth®-enabled mobile phone (see
below). When prompted on the phone,
select "Uconnect" and accept the
connection request.
5. Uconnect Phone will display an in-progress
screen while the system is connecting.
6. When your mobile phone finds the
Uconnect system, select "Uconnect."
7. When prompted on the mobile phone,
accept the connection request from
Uconnect Phone.
NOTE:
Some mobile phones will require you to enter
the PIN.
8. When the pairing process has successfully
completed, the system will prompt you to
choose whether or not this is your favorite
phone. Selecting "Yes" will make this phone
the highest priority. This phone will take
precedence over other paired phones within
range and will connect to the Uconnect
system automatically when entering the
vehicle. Only one mobile phone and/or one
Bluetooth® audio device can be connected
MULTIMEDIA
to the Uconnect system at a time. If "No" is
selected, simply select "Uconnect" from the
mobile phone/audio device Bluetooth®
screen, and the Uconnect system will
reconnect to the Bluetooth® device.
NOTE:
Software updates on your phone or the Ucon-
nect system may interfere with the Bluetooth®
connection. If this happens, simply repeat the
pairing process. However, first, make sure to
delete the device from the list of phones on your
Uconnect system. Next, be sure to remove
Uconnect from the list of devices in your
phone's Bluetooth® settings.
Pair Additional Mobile Phones
1. Press the Phone Settings button on the
touchscreen from the Phone main screen.
2. Press the Add Device button on the
touchscreen.
3. Search for available devices on your
Bluetooth®-enabled mobile phone. When
prompted on the phone, enter the name
and PIN shown on the Uconnect screen.
435
9