Table of Contents
Advertisement
74
GETTING TO KNOW YOUR INSTRUMENT PANEL
Left And Right Arrow Buttons:
Using the left
or right
arrow button allows
you to cycle through the submenu items of the
main menu item.
NOTE:
Holding the up
/ down
or left
arrow button will loop the user through the
currently selected menu or options presented
on the screen.
Upon returning to a main menu, the last
submenu screen viewed within that main menu
will be displayed.
OK Button
Push the OK button to access/select the infor-
mation screens or submenu screens of a main
menu item. To reset displayed/selected
features push and hold the OK button for two
seconds.
O
C
R
— I
E
IL
HANGE
ESET
F
Your vehicle may be equipped with an engine oil
change indicator system. The "Oil Change
Required" message will display in the instrument
cluster display for five seconds after a single chime
has sounded to indicate the next scheduled oil
change interval. The engine oil change indicator
system is duty cycle based, which means the
engine oil change interval may fluctuate,
dependent upon your personal driving style.
Unless reset, this message will continue to display
each time you place the ignition in the ON/RUN
position. To turn off the message temporarily, push
and release the OK button. To reset the oil change
indicator system (after performing the scheduled
maintenance), refer to the following procedure.
Oil Life Reset
/ right
1. Without pushing the brake pedal, place the
ignition in the ON/RUN mode (do not start the
engine).
2. Navigate to "Oil Life" submenu in "Vehicle
Info" in the instrument cluster display.
3. Push and hold the OK button until the gauge
resets to 100%.
Secondary Method For Oil Change Reset
Procedure
1. Without pushing the brake pedal, place the
ignition in the ON/RUN position (do not start
the engine).
QUIPPED
2. Fully press the accelerator pedal, slowly, three
times within ten seconds.
3. Without pushing the brake pedal, place the
ignition in the OFF position.
NOTE:
If the indicator message illuminates when you start
the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
I
C
D
NSTRUMENT
LUSTER
ISPLAY
I
TEMS
The instrument cluster display can be used to view
the main menu items for several features. Use the
up
and down
arrow buttons to scroll through
the driver interactive display menu options until
the desired menu is reached.
NOTE:
Depending on the vehicle's options, feature
settings may vary.
Main Gauge
Push and release the up
or down
button until the Main Gauge menu icon is
displayed in the instrument cluster display. Push
and release the left
or right
select the analog or digital type speedometer
display. Push and release the OK button to toggle
units (mph or km/h) of the speedometer.
Vehicle Info
Push and release the up
or down
button until the Vehicle Info menu icon is displayed
in the instrument cluster display. Push and release
the left
or right
arrow button to scroll
through the information submenus and push and
release the OK button to select or reset the
submenus.
M
ENU
arrow
arrow button to
arrow
Advertisement
Table of Contents
