Jeep GLADIATOR 2020 Owner's Manual page 451

Operating Temperature
Temperature
Speaker state (docked or Direct Current [DC] plugged in)
Speaker state (undocked and running off battery)
Speaker's Internal Battery Charging
The Jeep wireless speaker contains a
lithium-ion rechargeable battery. Typical
charging temperatures for these types of
batteries are from 32 to 113°F (0 to 45°C).
NOTE:
The functions described are for when the Jeep
wireless speaker is undocked from the vehicle.
When plugged into the docking station, the Jeep
wireless speaker functions as part of the
vehicle's sound system.
Phone & Bluetooth® Pairing
A feature of the Jeep wireless speaker is the
ability for the Jeep wireless speaker to connect
to devices using Bluetooth®. Follow these
simple steps to connect a Bluetooth enabled
device to the Jeep wireless speaker:
<-4°F -4 to 32°F
(< -20°C) (< -20 to 0°C)
Off
Off
No
1. Press and hold the power button for 2-3
seconds to turn the Jeep wireless speaker
on.
2. Turn "on" Bluetooth® for the device you
desire to be connected to the Jeep wireless
speaker. For instructions on how to turn on
and off Bluetooth® settings for the desired
device, refer to the device's user manual.
3. When powered on, the Jeep wireless speaker
will automatically enter pairing mode. To pair
a second device, press and hold the
Bluetooth® button for 2-3 seconds, until an
audio cue is heard. Then go to the device's
Bluetooth® settings and select "Jeep
Speaker" from the list.
The Jeep wireless speaker will remember the
last eight devices it has paired with.
32 to 113°F 115 to 140°F
(0 to 45°C) (46 to 60°C)
On On
On On
No Yes
NOTE:
If the Jeep wireless speaker is left on with an
inactive Bluetooth® connection for 30 minutes,
it will automatically turn off. The Jeep wireless
speaker can be turned on again by pressing and
holding the power button for 2-3 seconds.
Resetting Your Jeep Wireless Speaker
To reset the Jeep wireless speaker to its original
factory setting, press and hold the reset button
under the back cover for 8-10 seconds.
Speakerphone
The speakerphone feature can be used by
pressing the "Voice Control" button on the Jeep
wireless speaker. This feature can be used to
answer and end calls over the speakerphone.
MULTIMEDIA 449
>140°F
(>60°C)
On Off
On Off
No No
9