Jeep GLADIATOR 2020 Owner's Manual page 452

450 MULTIMEDIA
Volume And Playback Control
Volume can be increased or decreased by
briefly pressing the + button or - button. When
the maximum volume is reached, an audio cue
will sound.
To skip to the next track, press and hold the +
button. To go to the previous track, press the -
button.
Qualcomm TrueWireless™ Stereo
A feature of the Jeep wireless speaker is being
able to pair two Jeep wireless speakers together
for Qualcomm TrueWireless™ Stereo. This
feature allows for two Jeep wireless speakers to
play left and right stereo sound.
Below are the steps needed for Qualcomm
TrueWireless™ Stereo:
1. Push and hold the power button on both
Jeep wireless speakers until both speakers
turn on.
2. Place both speakers into Qualcomm
TrueWireless™ Stereo pairing mode. This
can be achieved by pressing and holding
the Battery Status button on both speakers
until an audio notification is heard from
both speakers.
3. Connect one of the Jeep wireless speakers
to the Bluetooth® source. Refer to previous
section "Phone & Bluetooth® Pairing" for
additional information.
4. Once the Jeep wireless speaker is
connected to the Bluetooth® device, audio
will be played from both speakers.
NOTE:
While in Qualcomm TrueWireless™ Stereo
mode, the volume will not have independent
speaker control. Pushing the Up or Down
Volume button on either Jeep wireless speaker
will affect the audio output on both, as well as
volume adjustments on the Bluetooth® device.
Waterproof Features
The Jeep wireless speaker is IP67 waterproof
certified with design in mind to withstand
rainfall, waterjets, splashing or submerged in
up to 3ft (1m) of water for up to 30 minutes.
CAUTION!
Ensure the Jeep Wireless Speaker is
prepared for use in wet environments by
removing all cable connections and making
sure all port covers are sealed tightly. If the
cover is not secured properly, the Jeep
Wireless Speaker may sustain water damage.
Warnings, Caution & Legal Information
To reduce the risk of fire or electric shock, do
not expose the Jeep wireless speaker to rain or
moisture while charging. The Jeep wireless
speaker should not be exposed to dripping or
splashing, and objects filled with liquids, such
as vases, should not be placed on or near it
while being charged or charging other devices.
As with any electronic products, use care not to
spill liquids into any part of the product. Liquids
can cause a failure and/or a fire hazard. The
power supply must be used indoors only. Make
no modifications to the product or accessories.
Unauthorized alterations may compromise
safety, regulatory compliance, and system
performance, and will void the warranty. Do not
place any flame sources, such as lighted
candles, on or near the Jeep wireless speaker.
The Jeep wireless speaker contains small parts