Jeep GLADIATOR 2020 Owner's Manual page 355

Hide thumbs Also See for GLADIATOR 2020:

Table of Contents

3. Remove the grommets under the front seat.

First for the rear carpet and then the front

Front And Rear Carpet Split

4. Under the back of the front seat, open the

carpet split and then pull out the rear edge

and slide the carpet to the front (do not

remove the harness).

Rear Underside Of Front Seat

2 — Carpet Split

5. Finally open the carpet split around seat

bracket and then remove the last two

6. When reinstalling carpet, perform these

steps in reverse order, making sure that the

carpet is tucked under the scuffs, B pillar,

and console, and then refasten the

SERVICING AND MAINTENANCE

1. Remove the grommets under the front seat

(one left and one right).

Carpet Split

2. Then pull the carpet out, to the rear and

open the carpet split around the front seat

3. Remove the rear Under Seat storage bin (if

equipped), by removing the four bolts that

hold it to the floor.

4. Remove the fastener bin from the rear floor,

it is held in by clips.

Show Quick Links

Table of Contents