Jeep GLADIATOR 2020 Owner's Manual page 298

296 IN CASE OF EMERGENCY
2. Insert the extension tube through the
access hole between the lower tailgate and
the top of the bumper and into the winch
mechanism tube.
Winch Mechanism Tube
Inserting The Extension Tubes Into The Access Hole
3. Rotate the lug wrench handle counter-
clockwise until the spare tire is on the
ground with enough cable slack to allow you
to pull it out from under the vehicle.
Rotating The Lug Wrench Handle
4. Pull the spare tire out from under the
vehicle to gain access to the spare tire
retainer.
Pulling The Spare Tire Out
5. Lift the spare tire with one hand to give
clearance to tilt the retainer at the end of
the cable.
6. Pull the retainer through the center of the
wheel.
Pulling The Retainer Through The Center Of The Wheel
NOTE:
The winch mechanism is designed for use with
the extension tubes only. Use of an air wrench
or other power tools is not recommended and
can damage the winch.