Jeep GLADIATOR 2020 Owner's Manual page 412

410 MULTIMEDIA
1. Place the ignition in the ACC or ON/RUN
position.
2. Push the PHONE button on the faceplate.
If there are no phones currently

connected with the system, a pop-up
appears asking if you would like to pair a
mobile phone.
3. Select "Yes" to begin the pairing process.
4. Search for available devices on your
Bluetooth®-enabled mobile phone.
Press the Settings button on your mobile

phone.
Select "Bluetooth®" and ensure it is

enabled. Once enabled, the mobile
phone will begin to search for Bluetooth®
connections.
Pairing A Phone
If "No" is selected and you still would like to
pair a mobile phone, press the Settings but-
ton from the Uconnect Phone main screen.
Select the Paired Phones button, and

then press the Add Device button on the
touchscreen.
Search for available devices on your

Bluetooth®-enabled mobile phone (see
below). When prompted on the phone,
select "Uconnect" and accept the
connection request.
5. Uconnect Phone will display an in-progress
screen while the system is connecting.
6. When your mobile phone finds the
Uconnect system, select "Uconnect."
7. When prompted on the mobile phone,
accept the connection request from
Uconnect Phone.
Some mobile phones will require you to

enter the PIN.
8. When the pairing process has successfully
completed, the system will prompt you to
choose whether or not this is your favorite
phone. Selecting the Yes button will make
this phone the highest priority. This phone
will take precedence over other paired
phones within range and will connect to the
Uconnect system automatically when
entering the vehicle. Only one mobile phone
and/or one Bluetooth® audio device can be
connected to the Uconnect system at a
time. If the No button is selected, simply
select "Uconnect" from the mobile phone/
audio device Bluetooth® screen, and the
Uconnect system will reconnect to the
Bluetooth® device.
NOTE:
Software updates on your phone or the Ucon-
nect system may interfere with the Bluetooth®
connection. If this happens, simply repeat the
pairing process. However, first, make sure to