Shifting - Jeep GLADIATOR 2020 Owner's Manual

206 STARTING AND OPERATING
S
HIFTING
Fully press the clutch pedal before shifting
gears. As you release the clutch pedal, lightly
press the accelerator pedal.
You should always use FIRST gear when starting
from a standing position.
Engine Speeds
Accel.
3.6L
Cruise
NOTE:
Vehicle speeds shown in the chart above are for 2H and 4H only, vehicle speeds in 4L would be significantly less.
NOTE:
A certain amount of noise from the transmis-
sion is normal. This noise can be most notice-
able when the vehicle is idling in NEUTRAL with
the clutch engaged (clutch pedal released), but
it may also be heard when driving. The noise
may also be more noticeable when the trans-
mission is warm. This noise is normal and is not
an indication of a problem with your clutch or
transmission.
Manual Transmission Shift Speeds in MPH (KM/H)
1 to 2 2 to 3
15 (24) 24 (39)
10 (16) 19 (31)
Recommended Vehicle Shift Speeds
To utilize your manual transmission efficiently
for both fuel economy and performance, it
should be upshifted as listed in the
recommended shift speed chart. Shift at the
vehicle speeds listed for acceleration. When
heavily loaded or pulling a trailer these
recommended up shift speeds may not apply.
3 to 4 4 to 5
50 (80) 65 (104)
40 (64) 55 (88)
5 to 6
70 (112)
65 (105)