Jeep GLADIATOR 2020 Owner's Manual page 118

116 GETTING TO KNOW YOUR INSTRUMENT PANEL
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read "Adaptive Cruise Control Ready."
Push the SET + or the SET - button (located on
the steering wheel), and the following will
display in the instrument cluster display.
ACC SET
When ACC is set, the set speed will display in
the instrument cluster.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
System Cancel

Driver Override

System Off

ACC Proximity Warning

ACC Unavailable Warning

For further information, refer to "Adaptive
Cruise Control (ACC) — If Equipped" in "Starting
And Operating."
Fuel Economy
Push and release the up or down arrow button
until the Fuel Economy icon is highlighted in the
instrument cluster display. Push and hold the
OK button to reset average fuel economy
feature.
Toggle left or right to select a display with or
without Current Fuel Economy Information.
Range – The display shows the estimated

distance (mi or km) that can be traveled with
the fuel remaining in the tank. When the
Range value is less than 10 miles (16 km),
the Range display will change to a "LOW"
message. Adding a significant amount of fuel
to the vehicle will turn off the "LOW" message
and a new Range value will display. Range
cannot be reset through the OK button.
NOTE:
Significant changes in driving style or vehicle
loading will greatly affect the actual drivable
distance of the vehicle, regardless of the Range
displayed value.
Average – The display shows the average fuel

economy (MPG, L/100km, or km/L) since the
last reset.
Current – The display shows the current fuel

economy (MPG, L/100km, or km/L) while
driving.
Trip
Push and release the up or down arrow button
until the Trip icon/title is highlighted in the
instrument cluster display, then push and
release the left or right arrow button to select
Trip A or Trip B.
The Trip A and Trip B information will display the
following:
Distance

Average Fuel Economy

Elapsed Time

Hold the OK button to reset all the information.