Jeep GLADIATOR 2020 Owner's Manual page 381

Safety/Driving Assistance — If Equipped
After pressing the Safety/Driving Assistance button on the touchscreen, the following settings will be available:
Setting Name
Forward Collision Warning — If Equipped
Forward Collision Warning Sensitivity — If Equipped
NOTE:
Sets the distance in which a Forward Collision Warning occurs.
ParkSense — If Equipped
NOTE:
The Rear Park Assist system scans for objects behind the vehicle when the transmission gear selector is in REVERSE and the vehicle speed is less
than 7 mph (11 km/h).
Front ParkSense Volume
Rear ParkSense Volume
Blind Spot Alert — If Equipped
NOTE:
If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the sensor may have become
misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. A sensor that is misaligned will result in the Blind Spot Monitoring
not operating to specification.
ParkView Backup Camera Delay
NOTE:
The "ParkView Backup Camera Delay" setting determines whether or not the screen will display the rear view image with dynamic grid lines for up to
10 seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if the vehicle's speed exceeds 8 mph (13 km/h), the transmission
is shifted into PARK, or the ignition is switched to the OFF position.
Selectable Options
Off Warning Only
Near Med
Sound Sound & Display
Low Medium
Low Medium
Off Lights
On
MULTIMEDIA 379
Warning & Braking
Far
High
High
Lights & Chime
9
Off