Jeep GLADIATOR 2020 Owner's Manual page 117

Speedometer
Push and release the up or down arrow button
until the speedometer menu icon is displayed in
the instrument cluster display. Push and
release the OK button to toggle between mph
and km/h.
Vehicle Info
Push and release the up or down arrow button
until the Vehicle Info menu icon is displayed in
the instrument cluster display. Push and
release the left or right arrow button to scroll
through the information submenus and push
and release the OK button to select or reset the
resettable submenus.
Tire Pressure Coolant Tempera-
 
ture
Transmission Oil Temperature
 
Temperature —
Automatic Trans-
mission Only
Oil Pressure Oil Life
 
Battery Voltage

Off Road — If Equipped
Push and release the up or down arrow button
until the Off Road menu icon is displayed in the
instrument cluster display. Push and release
the left or right arrow button to scroll through
the information submenus.
Drivetrain
Front Wheel Angle: displays the graphical and

numerical value of calculated average front
wheel angle from the steering wheel
orientation.
Transfer Case Lock Status: displays "Lock"

graphic only during 4WD High, 4WD High Part
Time, 4WD Low status.
Axle Lock And Sway Bar Status (if equipped):

displays front and rear or rear only axle locker
graphic, and sway bar connection graphic
with text message (connected or discon-
nected).
Pitch And Roll
Displays the pitch and roll of the vehicle in the
graphic with the angle number on the screen.
GETTING TO KNOW YOUR INSTRUMENT PANEL
NOTE:
When vehicle speed becomes too high to
display the pitch and roll, "- -" will display in
place of the numbers, and the graphic will be
greyed out. A message indicating the necessary
speed for the feature to become available will
also display.
Driver Assist — If Equipped
The Driver Assist menu displays the status of
the ACC system.
Push and release the up or down arrow button
until the Driver Assist menu is displayed in the
instrument cluster display.
Adaptive Cruise Control (ACC) Feature — If
Equipped
The instrument cluster display displays the
current Adaptive Cruise Control (ACC) system
settings. The information displayed depends on
ACC system status.
Push the Adaptive Cruise Control (ACC) ON/OFF
button (located on the steering wheel) until one
of the following displays in the instrument
cluster display:
115
3