Oil Life Reset - If Equipped - Jeep Gladiator 2020 Owner's Manual

Hide thumbs Also See for Gladiator 2020:
Table of Contents

Advertisement

The Main Menu items consists of the following:
• Speedometer
• Vehicle Info
• Off Road — If Equipped
• Driver Assist — If Equipped
• Fuel Economy
• Trip Info
• Stop/Start — If Equipped
• Audio
• Messages
• Screen Setup
Oil Life Reset — If Equipped
Your vehicle may be equipped with an engine oil change
indicator system. The "Oil Change Required" message will
display in the instrument cluster display for five seconds
after a single chime has sounded to indicate the next sched-
uled oil change interval. The engine oil change indicator
system is duty cycle based, which means the engine oil
change interval may fluctuate, dependent upon your
personal driving style.
GETTING TO KNOW YOUR INSTRUMENT PANEL
Unless reset, this message will continue to display each time
you place the ignition in the ON/RUN position. To turn off
the message temporarily, push and release the OK button.
To reset the oil change indicator system (after performing the
scheduled maintenance), refer to the following procedure.
Oil Life Reset
1. Without pushing the brake pedal, place the ignition in the
ON/RUN mode (do not start the engine).
2. Navigate to "Oil Life" submenu in "Vehicle Info" in the
instrument cluster display.
3. Push and hold the OK button until the gauge resets to
100%.
Secondary Method For Oil Change Reset Procedure
1. Without pushing the brake pedal, place the ignition in the
ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within ten seconds.
3. Without pushing the brake pedal, place the ignition in the
OFF/LOCK position.
169
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents