Jeep GLADIATOR 2020 Owner's Manual page 32

30 GETTING TO KNOW YOUR VEHICLE
3. Remove the plastic wiring access door
under the instrument panel by sliding the
plastic panel along the door frame toward
the seats until the tabs are detached.
Wiring Access Door
NOTE:
Do not force open; this will break the plastic
cover.
4. Pull up on the red locking tab to unlock the
wiring harness.
Closed Wiring Harness
1 — Locking Tab
2 — Wiring Harness Lever
5. Push and hold down the black security tab
under the wiring harness, and lift the
harness lever into the open position.
Open Wiring Harness
1 — Wiring Harness Lever
2 — Black Security Tab
6. With the wiring harness open, pull
downward on the wiring connector to
unplug. Unhook the wire harness strap from
the hook on the bodyside door opening.
Store the wiring connector in the lower door
basket of the door.