Table of Contents
Advertisement
User Manual: WaveLinx Lite (4.0)
Template Maintenance
Revert an Area to the Default Template
If no devices have been provisioned in an area that has been created from a custom template, the area can be changed back to the default
template settings using the 'Revert Template' option. This option will not be available once devices are provisioned to the area.
To revert an area to the default template:
1: Open the site and then open the area.
2: In the template section, tap the revert icon ' '.
3: When prompted, confirm by tapping 'Revert'. The area template should reflect 'Default' with the default configuration of zones, occupancy set
settings, and scene settings.
No provisioned
devices
Tap '
' to revert
template
Modify a Template
Templates can be modified to change the zone, occupancy set and scene settings. Once an area is created, it is linked to the template until
devices are provisioned in the area. There are two methods to modifying a template:
• Modifying templates from the app menu: This method will modify the template for future use BUT will not automatically update existing
areas created from the template.
• Modifying templates from the area: This method will modify the template for future use AND will automatically update existing areas
created from the template that have no provisioned devices. This includes areas in other sites if the same template was used. Areas that
have provisioned devices will not update and will need to be modified manually if the same changes are desired.
Modifying Templates from the App Menu
This method will modify the template for future use BUT will not automatically update existing areas created from the template.
Tap 'Revert'
Default template
loaded
www.cooperlighting.com
43
Advertisement
Table of Contents
