Update Devices Using A Separately Provided Firmware File - Cooper WaveLinx Lite User And Programming Manual

Update Devices Using a Separately Provided Firmware File

If a firmware file for a specific device has been provided, the update will follow a slightly different procedure.
Loading a Provided Firmware File into the Mobile App
The WaveLinx Lite Mobile App allows users to load a specific device firmware file for device upgrade. In this instance, the file is not
downloaded through the cloud and will be specific to one device type.
1: Save the provided firmware file to an easy to locate file on the mobile device. Do not change the name of the file unless instructed to do so.
Launch the WaveLinx Lite Mobile Application from the app icon.
2: Tap the menu ' ', and then select 'System'. If not already showing the 'Firmware Upgrade' screen, select the more icon '
'Firmware Upgrade'.
3: Tap 'Select Local File' and then use the 'Choose File' button to browse to the file location. The file name should be displayed in the 'File for
Upgrade' section. Proceed to the next section to run the device update.
Tap 'menu'
Select 'system'
Select 'Firmware Upgrade'
Once this screen is exited, the file will no longer be available. Follow the steps above to load the file if it needs to be used again or select
'Replace File' to select a file for a different device type.
Note: Some devices may also support conversion from WaveLinx Lite to WaveLinx Pro operation. Contact technical support for details.
160
www.cooperlighting.com
Select 'Local File' then tap
'Choose File'. Browse to
locate the file.
User Manual: WaveLinx Lite (4.0)
' and then tap
Loaded file