Add A Site Manually; Step 1: Create A Site - Cooper WaveLinx Lite User And Programming Manual

Table of Contents

User Manual: WaveLinx Lite (4.0)

Add a Site Manually

This section discusses setting up the site outside of using the site setup wizard. The wizard will be used for the initial site creation and then

other steps will be manually performed. This allows a technician to initially create a site, and then later add the structure and devices.

The site setup wizard also allows users to 'Skip, Add Later' at any point past the initial site creation. At that point, any function that was skipped

can be performed manually.

• Step 1: Create a site(s) (requires internet connection)

• Step 2: Create areas

• Step 3: Manage the area's zones

• Step 4: Manage the area's occupancy sets

• Step 5: Provision the area devices and assign to zones

• Step 6: Repeat process for additional areas

Before proceeding with the below steps, please review "Create Templates for Initial Site Setup" on page 34 regarding the use of customized

templates to learn how to create custom templates. Templates will be used in step 2 of the site setup.

Step 1: Create a Site

To start a new location's setup, first create a site for the facility. Each facility administered by the WaveLinx Lite App is created as a unique site.

One site can contain up to 28 areas. There is no limit on the number of sites that one user can create.

1: Open the WaveLinx Lite Mobile Application.

2: Tap 'Add a Site' or tap the ' ' icon.

3: Tap ' ' to close the tutorial and to access the site setup screen.

4: Enter a unique site name (alpha numeric) and site details. Fields marked with the asterisk (*) are required. Tap 'Next' to continue. The site will

be created. If the app displays the message "Error, site name already exists", the site name has already been taken by another user for their

site. Try adding a unique number or change the site name to something else.

Select to 'Add a Site'

or tap on '

Tap '

' to close

tutorial