Download Print this page

Advertisement

Available languages

Available languages

Quick Links

IB519142EN
Installation Instructions – APN Instruction Sheet
Instructions d'installation – Feuille d'instruction, série APN
Instrucciones de instalación – Hoja de instrucciones de APN
IMPORTANT: Read carefully before installing fixture. Failure to comply with these instructions may result in death,
serious bodily injusry and property damage. Retain for future reference.
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product
must be performed by a qualified electrician. This product must be installed in accordance with the
applicable installation code by a person familiar with the construction and operation of the product and
hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any
maintenance. Disconnect power at fuse or circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Must be very careful if power tools are used to install the fixture. Uncontrolled torque setting may lead to
thread/gasket damage or lens breakage.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may
arise from the improper, careless, or negligent installation, handling or use of this product.
NOTICE: If additional support is needed in connection with installation, operation, or maintenance, contact your nearest
representative." Leave out the first part entirely.
NOTICE: Proper grounding is required to ensure personal safety. Carefully observe grounding procedure under installation
section.
NOTICE: Fixture may become damaged and/or unstable if not installed properly.
Note: Specifications and dimensions subject to change without notice.
GENERAL: Upon receipt of fixture thoroughly inspect for any freight damage, which should be brought to the attention
of the delivery carrier. Compare the catalog description listed on the packing slip with the fixture label on the housing to
assure you have received the correct merchandise.
WARNING
Brand Logo
reversed out of
black
INS #
INS #

Advertisement

loading

Summary of Contents for Cooper IB519142EN

  • Page 1 Must be very careful if power tools are used to install the fixture. Uncontrolled torque setting may lead to thread/gasket damage or lens breakage. DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
  • Page 2: Installation

    Insert The Fixture Into Ceilling Grid Rail Remove access plate to access quick disconnect. (Figure 2) Access Plate Grid Rail Remove Access Plate To Access Quick Ceilling Grid Clips Disconnect Figure 4.  Figure 2.  Cooper Lighting Solutions IB519142EN Installation instructions...
  • Page 3: Fixture Maintenance

    4 screws 2 per side. Silde LED tray towards open end to access Driver. (Figure 6) Led Tray screws End Caps Remove End Caps to access LEDs Tray and Driver Led Tray screws Figure 6.  Cooper Lighting Solutions IB519142EN Installation instructions...
  • Page 4 La désobéissance aux instructions suivantes représente un risque de blessures graves ou mortelles et de dommages matériels. EXONÉRATION DE RESPONSABILITÉ : Cooper Lighting Solutions n’assume aucune responsabilité pour les dommages ou pertes de quelque nature que ce soit pouvant découler d’une installation, d’une manipulation ou d’une utilisation inappropriée, imprudente ou négligente de ce produit.
  • Page 5 (Figure 2). du plafond. Plaque d’accès Rail de la grille Retirez la plaque d’accès pour accéder à la fiche de débranchement Rail de la grille du plafond rapide Figure 4.  Figure 2.  Cooper Lighting Solutions IB519142EN Instructions d’installation...
  • Page 6 (Figure 6) Vis du plateau de DEL Capuchons d’extrémité Retirez les capuchons d’extrémité pour accéder au plateau et aux pilotes de DEL. Vis du plateau de DEL Figure 6.  Cooper Lighting Solutions IB519142EN Instructions d’installation...
  • Page 7 El incumplimiento de estas instrucciones puede ocasionar la muerte, lesiones corporales graves y daños a la propiedad. RENUNCIA DE RESPONSABILIDAD: Cooper Lighting Solutions no asume ninguna responsabilidad por daños o pérdidas de ningún tipo que puedan surgir por la instalación, manipulación o uso inadecuado, descuidado o negligente de este producto.
  • Page 8: Instalación

    (Figura 2) Placa de acceso Riel de la grilla acceso Retire la placa de acceso para Riel de la grilla en el techo acceder a la desconexión rápida Figura 4.  Figura 2.  Cooper Lighting Solutions IB519142EN Instrucciones de instalación...
  • Page 9 (Figura 6). Tornillos de las bandejas Tapas de extremo de LED Retire las tapas de extremo para acceder a la bandeja de LED y Tornillos de las los controladores bandejas de LED Figure 6.  Cooper Lighting Solutions IB519142EN Instrucciones de instalación...
  • Page 10 Visite www.cooperlighting.com para conocer nuestros términos y condiciones. Cooper Lighting Solutions 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.cooperlighting.com Cooper Lighting Solutions is a registered trademark. All trademarks are property Canada Sales of their respective owners. 5925 McLaughlin Road Mississauga, Ontario L5R 1B8...