Table of Contents
Advertisement
16: The template is now complete. In the 'Template Details' screen, tap 'Save' to save the template to the mobile device. If there is an internet
connection, the templates will automatically sync to the user's cloud account. If there is not an internet connection, manually sync the
template once the connection is available. See "Sync Templates" on page 42 for details.
Tap 'Save'
17: Repeat the steps in this section to add additional networked area templates for any common area configurations.
Create a Standalone Area Custom Template
Templates for a standalone area allow customization of:
• Occupancy Sensor Settings: Adjust the hold time, occupied, energy saver and unoccupied response.
• Trim Settings: Adjust the low-end and high-end trim levels.
To create a custom template for a standalone area:
1: Launch the WaveLinx Lite Mobile Application from the app icon.
2: Tap the menu '
', and then select 'Templates'.
3: If this is the first custom template, tap 'Add Template', otherwise tap ' ' to add a new template.
4: Type a unique descriptive name for the template that will allow for easy identification later and then tap 'Standalone'. The template name
must be different from other template names created by that registered user.
Tap 'menu'
Select 'Templates'
38
www.cooperlighting.com
Template saving and
syncing to cloud
Tap '
' or 'Add a Template'
User Manual: WaveLinx Lite (4.0)
Template shows in the
networked template list
Unique descriptive name
Select 'Standalone'
Advertisement
Table of Contents
