Table of Contents
Advertisement
User Manual: WaveLinx Lite (4.0)
Modify Wallstations in Networked Areas
Wallstations can only be provisioned/assigned to network areas. Within the area, wallstations can be modified to allow for a more descriptive
name and different command actions.
Rename Wallstation
To modify a wallstation:
1: Bring the mobile device within range (within 60 feet) of any line voltage powered provisioned WaveLinx Lite device in the desired area.
2: Ensure that the mobile device Bluetooth is turned on, and then open the WaveLinx Lite Mobile Application.
3: In the site list, select a site.
4: In the area list, select the desired area. After a short delay, verify that the area shows that the mobile application is connected to the network.
Tap on the
icon if it is necessary to refresh the connection.
5: In the 'Devices in Area' list, locate the wallstation. Tap on the wallstation to open it for configuration. The mobile application will display the
wallstation's configuration on the screen.
• Line voltage wallstations only: If needed, use the identify icon '
• Battery powered wallstations only: After selecting the wallstation, when prompted to wake the station, go to the physical wallstation and
press any button. On the app screen, tap 'Confirm'.
Select the site
Select the area
If needed, use 'identify' to
locate the correct device (line
voltage wallstations only)
6: Tap on the pencil icon '
' at the top of the screen and type a unique name for the wallstation. Tap 'Save'.
Select edit
75
To make a change to a battery powered wallstation, there must be a Bluetooth communication connection through a line voltage powered WaveLinx Lite device.
' to flash the wallstation LED until the correct one is identified.
Not connected
Connected
Verify network
connection
Select a wallstation
Battery wallstations
only: Press any button
on the wallstation
Tap 'Confirm'
Enter desired name
Tap 'save'
www.cooperlighting.com
75
97
Advertisement
Table of Contents
