Table of Contents
Advertisement
Basic Site Setup Using the Mobile Application
This section is written specifically for site commissioning agents who are performing the initial WaveLinx Lite 4.0 equipment setup. For facility
owners/other personnel that are using the WaveLinx Lite Mobile App to administer a site that has already been programmed, skip to "Modify
Programming in Networked Areas" on page 80 or "Modify Programming in Standalone Areas" on page 119.
There are two methods to setting up a site. This section will outline creating a new site using the site setup wizard as well as manually
configuring the site.
IMPORTANT: The process of creating a site requires a connection to the internet. If internet access on site will be
limited, create the site in advance. Once the site is created, the mobile application does not require an internet
connection to create areas, program zones or occupancy sets, or to provision devices.
Add a New Site Using the Site Setup Wizard
The site setup wizard is an easy-to-use tool that walks through the organization of the site, creation of areas, and the provisioning of devices.
To use the site setup wizard, there must be an internet connection as well as Bluetooth access between mobile device and the WaveLinx Lite
devices. The Site Setup Wizard is broken into four steps:
• Step 1: Create the site (requires internet connection)
• Step 2: Load or create templates
• Step 3: Create areas
• Step 4: Assign /provision devices (requires Bluetooth connection to devices)
Before proceeding with the below steps, please review "Create Templates for Initial Site Setup" on page 34 regarding the use of customized
templates to learn how to create custom templates. Templates will be used in steps 2 and 3 of the site setup wizard.
Step 1: Create a Site Using the Setup Wizard
To start a new setup, first create a site. Each facility administered by the WaveLinx Lite App is created as a unique site. One site can contain up
to 28 areas. There is no limit on the number of sites that one user can create.
Make sure that there is an internet connection on the mobile device.
1: Open the WaveLinx Lite Mobile Application.
2: Tap 'Add a Site' or tap the ' ' icon.
3: Optionally watch the online tutorial, tapping 'Next' to advance the screen OR tap ' ' to close the tutorial and to access the site setup screen.
4: When prompted, enter a unique site name (alpha numeric) and the site details. Fields marked with the asterisk (*) are required.
5: Tap 'Next' to continue. The site will be created. If the app displays the message "Error, site name already exists", the site name has already
been taken by another user for their site. Try adding a unique number or change the site name to something else.
Select to 'Add a Site'
or tap on '
'
Once the site is created, the setup wizard can be bypassed at any of the following steps by tapping 'Cancel' or 'Skip, Add Later' to performing
additional steps manually.
50
www.cooperlighting.com
View tutorial or
tap '
' to begin
setup
User Manual: WaveLinx Lite (4.0)
Note: For easy identification, use naming
conventions for large multi-site projects, i.e., "ABC
Parking 1st Floor", ABC Parking 2nd Floor, etc.
Enter site details
Tap 'Next'
Advertisement
Table of Contents
