User Manual: WaveLinx Lite (4.0)
Modify Programming in Standalone Areas
This section is specific to standalone areas. For networked areas, see "Modify Programming in Networked Areas" on page 80.
Once a standalone area has been defined, the behavior of devices can be modified if different operation is expected. This section discusses
how to:
• Modify areas
• Modify devices
• Modify occupancy sensor settings
• Calibrate closed loop sensors
Modify Area Settings in Standalone Areas
Once created, areas can be renamed or deleted. This section discusses how to perform these functions.
Rename an Area
An area can be renamed at any time. This process does not require connection to the internet or a connection to the WaveLinx Lite
device/network.
To rename an area:
1: Open the WaveLinx Lite Mobile Application.
2: In the site list, select a site.
3: In the area list, select the pencil icon ' ' or in the area screen select the info icon '
4: Change the area name, and then tap 'Update'.
Select the site
'.
Select edit or the
info icon in the area
Tap 'Update'
Update name
with changes
www.cooperlighting.com
119