Table of Contents
Advertisement
User Manual: WaveLinx Lite (4.0)
Raise and Lower the Light Level of a Single Device in a Standalone Area
To temporarily raise and lower the light level of a specific device in a networked area:
1: Ensure that the mobile device Bluetooth is turned on, and then open the WaveLinx Lite Mobile Application.
2: In the site list, select a site and then in the area list, select the standalone area.
3: Bring the mobile device within range (within 60 feet) of the desired device and then select the device from the 'Devices in this Area' section.
4: In the 'Dimmable' details page use the slider to adjust the light level for the desired device. The command will adjust the light to the desired
level for 10 minutes or until the device details page is exited.
Select the site
Select the area
View Status and Device Details in Any Area
The device details pages give status information regarding the device's dimming level, occupancy status, and daylight reading. The details
pages also contain valuable information and selectable options for the device. This section outlines the status, details, and functions available
on the device details pages.
Exiting the details page
will cause light to resume
the last light level
Select a device
Adjust the device light
level using slider or
entry field
www.cooperlighting.com
139
Advertisement
Table of Contents
