Table of Contents
Advertisement
In a standalone area, the area will only contain devices that attach
to/control lighting loads as the device must operate independent
of other controls. Wallstations have no use case in a standalone
area and cannot be assigned to this area type.
• Devices will show under the 'Devices in this Area' section.
• Filters can be used to limit displayed devices to a selected
device type.
• Tap 'Explore Unassigned Devices' to perform a device scan to
refresh unprovisioned devices.
Bluetooth Communications
To make programming changes or view settings, a Bluetooth connection must be made between the WaveLinx Lite App mobile device and the
WaveLinx Lite device(s).
Networked Area
When opening a networked area, the mobile application will
automatically try to connect to the area's Bluetooth mesh network. It
will connect through any line-voltage WaveLinx Lite device within
range that is provisioned to the area. The mobile device can then
communicate to any device (line voltage or battery powered)
that area's Bluetooth mesh network.
45
Once a battery powered wallstation is provisioned to a networked area, communication to the battery powered wallstation is routed through line voltage powered devices. At
least one line voltage powered device in the same area must be in range of the battery powered wallstation to modify wallstation settings.
26
www.cooperlighting.com
in
45
User Manual: WaveLinx Lite (4.0)
Find unprovisioned
devices
Filter by device type
Devices in the
standalone area
Advertisement
Table of Contents
