Table of Contents
Advertisement
User Manual: WaveLinx Lite (4.0)
To create an area:
1: Open the WaveLinx Lite Mobile Application.
2: In the site list, select a site.
3: Tap ' ' to add an area.
4: Tap on the 'Area Name' field and then enter the desired name (area names must be unique within the same site).
5: Use the selections and dropdown to select the desired type of area and template. Tap 'Save' to create the area.
6: Repeat these steps for other areas.
Select the site
Tap
to
add an area
Step 3: Add Zones (Networked Areas Only)
Skip this step for standalone areas which do not use zones.
In WaveLinx Lite, controlled devices (light fixtures, for example) are organized into zones. A zone is a group of lighting loads that should
operate together in a networked area. For instance, fixtures in the same row may be grouped into a zone to allow for uniform operation. A
networked area can contain up to 16 zones.
During the area creation, the template chosen will determine the quantity of zones added to a networked area. If more zones are needed than
what was provided in the template, use these steps to create the necessary zones.
An internet connection is not required to create zones. A Bluetooth connection is not necessary to add zones unless devices have previously
been provisioned to the area.
59
To create a zone:
1: Open the WaveLinx Lite Mobile Application.
2: In the site list, select a site.
3: In the area list, select the desired area.
Select the site
59
If the area has devices provisioned, modification of a previously created area parameters will require a Bluetooth connection to the WaveLinx Lite network in the area. Stand
within range (within 60 feet) of any line voltage WaveLinx Lite device that is provisioned to this area.
Name the area
Select area type
and template
then tap save
Select the area
Created area
Repeat to create
additional areas
www.cooperlighting.com
59
Advertisement
Table of Contents
