Step 6: Repeat The Process For Additional Areas; Step 7: Recommended Final Steps - Cooper WaveLinx Lite User And Programming Manual

If the provisioning fails, the 'Processing Request' screen will show exclamation points ' ' instead of checkmarks. Tap 'Close', move closer to
the device, and then tap ' ' to start the provisioning again until the process is successful. If the error continues, try closing the mobile
application and then turn off and then on the mobile device Bluetooth. Open the mobile application and try again. If the error continues, select
'View Logs' for further information and contact technical support.
8: Move close to the next device and repeat steps 3 through 7. Repeat for all devices that should belong to the standalone area.
Once devices are provisioned and assigned to the areas, the devices will begin operating with the default provisioned behavior or with the
behavior programmed into the template used for the areas.

Step 6: Repeat the Process for Additional Areas

Once the devices have been provisioned for the first area, repeat steps 3 through 5 for any additional areas in the site. For each area follow the
steps in the sections shown below:
• "Step 3: Add Zones (Networked Areas Only)" on page 59
• "Step 4: Manage the Area Occupancy Sets (Networked Areas Only)" on page 60
• "Step 5: Provision Area Devices" on page 63

Step 7: Recommended Final Steps

Once the initial setup is complete, open the site to review any configured areas. Open the area to view or change device
assignments and perform any remaining programming. Refer to "Modify Programming in Networked Areas" on page 80 or "Modify
Programming in Standalone Areas" on page 119 for programming details.
Open the configured
site
If the location has an internet connection, make certain to sync the mobile app's local database to the cloud by tapping 'Submit
Changes' in the site list. For more details on site sync to the cloud, see "Understand Site Syncing" on page 148.
Tap 'Submit
Changes '
70
www.cooperlighting.com
Open any area
Sync complete
User Manual: WaveLinx Lite (4.0)
Networked Area
View or change area
programming
Standalone Area
View or change
device programming