If You Cannot Make Copies As You Want - Ricoh 4800WD Operating Instructions Manual

If You Cannot Make Copies As You Want

This section explains causes of, and solutions for, unexpected copy results.
Problem
Misfeeds occur frequently.
Images are cropped when us-
ing Erase Border.
Parts of the image are not copied. The original is not placed cor-
Copies are blank.
The machine does not start
copying even though you
have inserted paper into the
paper bypass.
Causes
The paper is folded or
creased.
Jammed or torn paper is in-
side the machine.
The paper is curled.
The Erase Border setting is too
wide.
The margin of the original is
too narrow.
rectly.
An improper size of paper is
selected.
Print Position Adjustment or
Margin Adjustment mode is
selected.
You placed a custom size orig-
inal.
The original is not set correct-
ly.
The number of copies has not
been entered.
If You Cannot Make Copies As You Want
Solutions
Cut away the folded or
creased part from the roll pa-
per.
Remove the paper properly.
See "xClearing Misfeeds",
General Settings Guide.
Smooth out the curl and try
again.
Set the Erase Border setting
narrower. See p.48 "Erase Bor-
der".
Place the original correctly.
See p.15 "Placing Originals".
Select the proper paper. See
"Copy Paper", General Set-
tings Guide.
Cancel Print Position Adjust-
ment or Margin Adjustment
mode. See p.50 "Margin Ad-
justment" and p.61 "Adjust
Print Position".
Enter the size of the original,
or set the scanning area wider.
See p.17 "Placing Custom Size
Originals" and p.17 "Wide
Scan".
Place the original with the sur-
face to be copied on face up.
Enter the number of copies us-
ing the number keys. See ⇒
p.25 "Copying from the Paper
Bypass".
3
73