Specifying The Number Of Copies; Configuring Print Settings - Ricoh IS200E Operating Instructions Manual

The "Ready" message changes to
"Printing...".
Note
❒ Do not turn the power of this
machine off while B is dis-
played on the screen.
❒ Enter User ID and Password in
"Locked Print" screen if the
function is set from WebStatus-
Monitor.
D D D D
If you want to continue print scan
data by scanning the originals on
the exposure glass, repeat step
C C C C
and .
Specifying the Number of
Copies
You can specify the number of copies
within the range that you have con-
figured using [Max. Number of Copies]
in [3.Print Scan Settings] under the
Scanner Features menu.
A A A A
While the Print Scan Ready
screen is displayed, enter the
number of copies you want by us-
ing the number keys.
This returns to the Print Scan
Ready screen, and the number you
have entered is displayed at the
top right of the screen

Configuring Print Settings

When you perform a Print Scan oper-
ation, you can change the settings ini-
tially displayed on the screen (which
settings are those that you have con-
figured and registered to [Default] in
[5.Print Settings] under the Scanner
Features menu).
A A A A
While the Print Scan Ready
screen is displayed, press [Set-
tings].
B B B B
The Print Settings screen is dis-
played.
B B B B
Select whether you configure the
print settings manually, or use
one of the user settings you have
registered.
Reference
You can confirm the print set-
tings you have registered. See
p.167 "Confirming the Print Set-
tings".
Printing Scan Data
165
8