Ricoh 4800WD Operating Instructions Manual page 245

❖ ❖ ❖ ❖ Permit Settings by SNMP V1 and V2
This can be specified by the network administrator. When the machine is ac-
cessed using the SNMPv1, v2 protocol, authentication cannot be performed,
allowing machine administrator settings such as the paper setting to be
changed. If you select [Off], the setting can be viewed but not specified with
SNMPv1, v2.
• On
• Off
Note
❒ Default: On
❖ ❖ ❖ ❖ Permit Simple Encryption
This can be specified by the machine administrator.
Under Windows95/98/Me, advanced encryption is not possible with the
printer driver, so simple encryption is used. If you select [Off], printing with
simple encryption is not allowed and you cannot connect using the printer
driver under Windows95/98/Me. Specify this setting when using a driver
that does not support advanced encryption.
Limitation
❒ When this setting is set to [Off] and you want to edit the address book in
[User Management Tool] or [Address Management Tool] in SmartDeviceMonitor
for Admin, or you want to access the machine using DeskTopBinder or the
ScanRouter software, enable SSL/TLS for encrypted communication. For
details about specifying SSL/TLS, see p.42 "Setting the SSL / TLS Encryp-
tion Mode".
• On
• Off
Note
❒ Default: Off
Specifying the Extended Security Functions
6
79