Using Autonet - Ricoh 4800WD Operating Instructions Manual

Appendix
Note
❒ If a static address is not selected,
or is set to 0.0.0.0, the interface
using the address assigned by
DHCP is used.
Note
❒ Machines that register the machine
NetBIOS name on a WINS server
must be configured for the WINS
server. See p.58 "wins".
❒ Supported DHCP servers are Mi-
crosoft DHCP Server included
with Windows 2000 Server, Win-
4
dows Server 2003, and Windows
NT 4.0, and the DHCP server in-
cluded with UNIX.
❒ If you do not use the WINS server,
reserve the machine's IP address in
the DHCP server so the same IP
address is assigned every time.
❒ To use the WINS server, change
the WINS server setting to "active"
using the control panel.
❒ Using the WINS server, you can
configure the host name via the re-
mote network printer port.
❒ DHCP relay-agent is not support-
ed. If you use DHCP relay-agent
on a network via ISDN, it will re-
sult in increased line charges. This
is because your computer connects
to the ISDN line whenever a packet
is transferred from the machine.
❒ If there is more than one DHCP
server, use the same setting for all
servers. The machine operates us-
ing data from the DHCP server
that responds first.
68

Using AutoNet

If the machine IP address is not auto-
matically assigned by the DHCP serv-
er, a temporary IP address starting
with 169.254 and not used on the net-
work can be automatically selected by
the machine.
Note
❒ The IP address assigned by the
DHCP server is given priority over
that selected by AutoNet.
❒ When AutoNet is running, the
NetBIOS name is not registered on
the WINS server.