If User Authentication Has Been Specified; User Code Authentication (Using The Control Panel); Login (Using The Control Panel) - Ricoh 4800WD Operating Instructions Manual

If User Authentication Has Been Specified

When user authentication (User Code Authentication, Basic Authentication,
Windows Authentication, or LDAP Authentication) is set, the authentication
screen is displayed. Unless a valid user name and password are entered, opera-
tions are not possible with the machine. Log on to operate the machine, and log
off when you are finished operations. Be sure to log off to prevent unauthorized
users from using the machine.
Note
❒ Consult the User Administrator about your login user name, password, and
user code.
❒ For user code authentication, enter a number registered in the address book
as [User Code].

User Code Authentication (Using the Control Panel)

When user authentication is set, the following screen appears.
Enter a user code (eight digit), and then press [#].

Login (Using the Control Panel)

Follow the procedure below to log on when Basic Authentication, Windows Au-
thentication, or LDAP Authentication is set. Follow the procedure below to log
on when basic authentication, Windows authentication, or LDAP authentication
is set.
A A A A
Press [Enter] for [Login User Name].
B B B B
Enter a login user name, and then press [OK].
C C C C
Press [Enter] for [Login Password].
D D D D
Enter a login password, and then press [OK].
If User Authentication Has Been Specified
5
61