Ricoh 4800WD Operating Instructions Manual page 35

3.
Paper feed knob
Use when loading paper rolls or clear-
ing paper jams. See p.105 "Loading
Paper" and p.110 "xClearing Mis-
feeds".
4.
Cutter knob
Use to manually cut paper if there are
paper jams in the cutter area of the
machine. Always return the cutter
knob to the left or right end.
❖ ❖ ❖ ❖ Cut paper trays
1.
Back fence
Adjust to the paper length.
2.
Anti-humidity heater switch
When humidity is high, paper in the
paper tray may absorb moisture,
which can affect copy quality. The
anti-humidity heater prevents this.
Turn this switch on when humidity is
high. See p.32 "Anti-humidity Heater
Switch" .
5.
Auto feed button
Use this to clear misfeeds in the paper
feed area. Keep this button pressed to
feed the roll paper continuously.
When approximately 100 mm, 3.9" of
paper length is fed, release the button
so that paper will be cut automatical-
ly.
6.
Roll holder
Adjust this to the size of the paper roll
you are using. See p.115 "Changing
the Paper Size".
3.
Side guide pocket
Use the side guide inside here to align
translucent paper. Keep covered
when not in use.
4.
Side lever
Use to fix the position of the side fenc-
es.
5.
Side fences
Adjust to the paper width.
Guide to Components
AHD020S
23
1