Ricoh 4800WD Operating Instructions Manual page 73

❖ ❖ ❖ ❖ Fine Ratio Adjustment: Printer
Specifies the fine ratio when the optional printer is installed. Depending on
paper type, environment, and humidity, copy paper can expand or shrink
slightly. This means that the size of the copy and the original do not match.
When the horizontal ratios are almost the same and there are differences be-
tween the vertical ratios, you can specify the vertical correction ratio. You can
make this setting for each paper type (plain, translucent, film and recycled pa-
per).
Note
❒ Default: 0.0%
❒ From –1.0% to 1.0% (in 0.1% increments)
❒ For details about how to set the fine ratio, see p.60 "Fine Ratio Adjustment:
Copier".
❖ ❖ ❖ ❖ Paper Output Exit: Copier
You can specify a tray to which copies are delivered.
• Front
• Rear
Note
❒ Default: Front
❖ ❖ ❖ ❖ Paper Output Exit: Document Server
You can specify a tray to which documents are delivered.
• Front
• Rear
Note
❒ Default: Front
❖ ❖ ❖ ❖ Job List Display Time
You can set the length of time that the job list display is shown before the dis-
play reverts back to the default screen.
Note
❒ Default: On
❒ When you select [On], enter the time from 10 to 999 seconds (in 1 second
increments) using the number keys.
❒ The default time is 15 seconds.
Settings You Can Change with User Tools
4
61