Placing Custom Size Originals; Wide Scan - Ricoh 4800WD Operating Instructions Manual

Placing Custom Size Originals

When placing custom size originals,
specify the size of the originals.
Note
❒ Paper with a vertical size of 210–
15000 mm (8.3"–590.5") and a hori-
zontal size of 210–914 mm (8.3"–
35.9") can be specified with this
function.
❒ If you do not specify the size, parts
of the image may not be copied.
A A A A
Press [Orientation/Custom].
B B B B
Press [Custm Size Orig.].
C C C C
Enter the horizontal size of the
original using the number keys,
and then press [#].
Note
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key,
and then enter the value again.
D D D D
Enter the vertical size of the origi-
nal using the number keys, and
then press [#].
E E E E
Press [OK].
F F F F
Place the originals, and then press
the { { { { Start} } } } key.

Wide Scan

The machine checks the original
width and then increases the scan size
to a slightly larger standard size.
Note
❒ Scan size differs depending on the
size of the original. See the follow-
ing table for available scan sizes:
❖ ❖ ❖ ❖ Metric version
Original width
Over than A4K(210 mm)
and less than 257 mm
Over than A3K(297 mm)
and less than 364 mm
Over than A2 K(420 mm)
and less than 515 mm
Over than A1K(594 mm)
and less than 728 mm
Over than A0K(841 mm)
and less than 914 mm
Over than B4K(257 mm)
and less than 297 mm
Over than B3K(364 mm)
and less than 420 mm
Over than B2K(515 mm)
and less than 594 mm
Over than B1K(728 mm)
and less than 841 mm
❒ The machine adjusts to a scan size
of the same paper series as the
original. If you want to mix the siz-
es of A and B series when scan-
n i n g , c o n t a c t y o u r s e r v i c e
representative.
Placing Originals
1
Scanning
width
A3K(297 mm)
A2K(420 mm)
A1K(594 mm)
A0K(841 mm)
914 mm
B3K(364 mm)
B2K(515 mm)
B1K(728 mm)
914 mm
17