Specifying Scan Settings - Ricoh 4800WD Operating Instructions Manual

7. Configuring/Registering
This section describes how to specify scan settings, the orientation of the origi-
nal, and the output tray of the original. In addition, this section describes the
programming function by which you can register frequently used settings.

Specifying Scan Settings

A A A A
Press [Scan Settings].
B B B B
Select items such as resolution
a n d o r i g i n a l s i z e , a n d t h e n
change their settings.
Specify the basic scan settings
(scan type, resolution, image den-
sity, scan size, and edit) as follows:
❖ ❖ ❖ ❖ Scan Type
Originals are scanned according
to the selected scan type.
Select the scan type from the fol-
lowing:
• Text (Print)
For standard originals con-
taining mainly text.
P r i n t e r p r i n t i n g i s b e s t
scanned with Text (Print).
Scan Settings
• Text (OCR)
For standard originals con-
taining mainly text.
Text (OCR) is suitable for
higher OCR accuracy.
• Drawing
For originals con ta ining
mainly lines, such as techni-
cal drawings.
This setting prevents smudg-
es on the original appearing
on the scanned image.
• Text / Photo
For originals containing a
mixture of text and photo-
graphs
• Photo
For originals containing pho-
tographs and other pictures
(two-value).
Creates scanned images suit-
able for printing.
❖ ❖ ❖ ❖ Resolution
Select the resolution from 150,
200, 300, 400, or 600 dpi.
❖ ❖ ❖ ❖ Image Density
Select the image density in sev-
en steps from iLighter (1) to
Darkerj (7), or use Auto Image
Density.
73