Monitoring And Configuring The Machine; Using Web Image Monitor - Ricoh 4800WD Operating Instructions Manual

3. Monitoring and Configuring

Using Web Image Monitor

Using Web Image Monitor, you can check the machine status and change set-
tings.
❖ ❖ ❖ ❖ Available operations
The following operations can be remotely performed using Web Image Mon-
itor from a client computer.
• Displaying machine status or settings
• Resetting the machine
• Managing the Address Book
• Making machine settings
• Making network protocol settings
• Making security settings
❖ ❖ ❖ ❖ Configuring the machine
To perform the operations from Web Image Monitor, TCP/IP is required. Af-
ter the machine is configured to use TCP/IP, operations from Web Image
Monitor become available.
❖ ❖ ❖ ❖ Recommended Web browser
• Internet Explorer 5.5 or higher
• Netscape Navigator 7.0 or higher
Note
❒ To use Netscape Navigator with Secured Sockets Layer (SSL: an encryption
protocol), use Netscape Navigator 7.0 or higher.
❒ If the previous versions of the Web browser above are used or JavaScript and
cookies are not enabled with the Web browser used, display and operation
problems may occur.
❒ If you are using a proxy server, change the Web browser settings. Contact
your network administrator for information about the settings.
❒ The previous page may not appear even after the back button of a Web
browser is clicked. If this happens, click the refresh button of a Web browser.
❒ Updating the machine information is not automatically performed. Click [Ap-
ply] in the display area to update the machine information.
the Machine
39