Multi-Access - Ricoh 4800WD Operating Instructions Manual

Combined Function Operations

Multi-Access

You can carry out another job using a different function while the current job is
being performed. Performing multiple functions simultaneously in this manner
is called "Multi-Access".
This allows you to handle your jobs efficiently, regardless of how the machine is
being used. For example, while making copies, you can scan documents to store
2
in the Document Server.
Note
❒ See p.56 "Function Priority" to set function priority. By default, the [Display
Mode] is set to first priority.
- Function Compatibility -
- -
The chart below shows sample operations when "Print Priority" is set to "Inter-
leave". See p.56 "Print Priority".
|: Simultaneous operations are possible.
$: Operation is enabled when the relevant function key is pressed and remote
switching (of the scanner) is done.
❍: Operation is enabled when the { { { { Interrupt} } } } key is pressed to interrupt the pre-
ceding operation.
→: Operation is performed automatically once the preceding operation ends.
×: The operation must be started once the preceding operation ends. (Simulta-
neous operations are not available.)
36