Understanding The Displayed Information; Configuring The Network Interface Board - Ricoh 4800WD Operating Instructions Manual

Monitoring and Configuring the Machine

Understanding the Displayed Information

This section explains how to read status information returned by the network in-
terface board.

Configuring the Network Interface Board

Use the following command to display network interface board settings:
• telnet : Use the "show" command. See p.52 "show".
3
Item
Common
Mode
Protocol Up/Down
TCP/IP
SMB
IP over 1394
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
Location
Contact
Soft switch
TCP/IP
mode
ftp
rsh
telnet
web
http
ftpc
snmp
autonet
ssl
nrs
60
Description
[up] means "active" and [down] means "inactive".
Internal version number
Internal version number
Machine name
Comment
Location of the machine in the SNMP and Rendezvous
information
Administrator information for the machine and contact
information in the SNMP information
[up] means "active" and [down] means "inactive".