Ricoh 4800WD Operating Instructions Manual page 589

Message
The specified group contains some
invalid destination(s). Do you want to
select only valid destination(s)?
Transmission has failed. Insufficient
memory in the destination hard disk.
To check the current status, press
[Scanned Files Status].
Updating the destination list...
Please wait. Specified destination(s)
or sender's name has been cleared.
Updating the destination list has
failed. Try again?
You do not have the privileges to use
this function.
No HDD is available for this function,
or File Format Converter is not con-
nected. Cannot use Scanner Function.
When a Message Is Displayed
Causes and solutions
The specified group contains some
destinations for sending by e-mail
and some destinations for sending
by Scan to Folder. To select destina-
tions for sending by email, press [Se-
lect] for the message displayed on
the e-mail screen. To select destina-
tion for sending by Scan to Folder,
press [Select] for the message dis-
played on the Scan to Folder screen.
Transmission has failed. There was
not enough free space on the hard
disk of the SMTP server, FTP server,
or client computer at the destination.
Allocate sufficient space.
If a destination or sender's name was
already selected, re-select it after this
message disappears.
Check whether the server is connected.
The machine has not been set to al-
low you to use the function. Consult
an administrator.
The required device for the scanner
function cannot be identified cor-
rectly. Contact your service repre-
sentative.
8
91