Description Of The Drive Interface; B3□-L Models - Delta ASDA-B3 Series User Manual

Product Overview

1.4 Description of the drive interface

1.4.1 B3□-L models
1
No.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
1-12
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Name
- 7-segment display.
CHARGE Power indicator.
Main circuit power input terminal: connects to commercial power supply
RST
(200 - 230 V
Control circuit power input terminal: connects to single-phase power supply
L , L
1C 2C
(200 - 230 V
Regenerative Connects to an external regenerative resistor, external regenerative braking
resistor unit, or the built-in regenerative resistor.
Servo drive current output: connects to the motor power connector (U, V, W).
UVW Do not connect to the main circuit power. Incorrect wiring will cause damage
to the servo drive.
Grounding
Connect to the ground wire for the power and servo motor.
screws
CN4 Mini USB connector: connects to PC.
CN3 MODBUS communication port connector.
CN1 I/O signal interface: connects to PLC or controls I/O.
CN10 STO connector: only available on B3A series servo drives.
CN2 Encoder connector: connects to the encoder.
C
N
4
Description
, 50 / 60 Hz).
AC
, 50 / 60 Hz).
AC
(8)
(9)
(10)
(11)
(12)
ASDA-B3