Advanced Settings - ZyXEL Communications MGS3600-24F User Manual

F M
RONT ATTER
Use this field to configure the initial value of remaining hops for MSTI information generated at the boundary of an MSTI region. It defines
how many bridges a root bridge can distribute its BPDU information to. Valid values are from 6 to 40 hops.
Transmit Hold Count:

Use this field to configure the number of BPDUs a bridge port can send per second. When exceeded, transmission of the next BPDU will be
delayed. Valid values are from 1 to 10 BPDUs per second.

Advanced Settings

Edge Port BPDU Filtering:

Use this check box to configure whether a port explicitly configured as Edge will transmit and receive BPDUs.
Edge Port BPDU Guard:

Use this check box to configure whether a port explicitly configured as Edge will disable itself upon reception of a BPDU. Disabled ports
enter the error-disabled state and are removed from the active topology.
Port Error Recovery:

Use this check box to configure whether a port in the error-disabled state will be automatically enabled after the
out. If recovery is disabled, ports have to be manually disabled and then re-enabled for normal STP operation. The error-disabled state is
also cleared by a system reboot.
Port Error Recovery Timeout:

Use this check box to configure the time that must pass before a port in the error-disabled state is automatically re-enabled. Valid values are
between 30 and 86400 seconds (24 hours).
MGS3600-24F/XGS3600-26F/XGS3600-28F 7-31
Port Error Recovery Time-
U ' G
SER S UIDE