Ipv6 Router Discovery Setup - ZyXEL Communications XS3800-28 User Manual

Table 33 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Discovery Setup (continued)
L ABEL
NS Interval
Reachable
Time
8.9.9 IPv6 Ro ute r Disc o ve ry Se tup
Use this screen to configure router discovery settings for each interface. Click the link next to
Disc o ve ry Se tup
Basic Setting > IPv6 > IPv6 Configuration > IPv6 Router Discovery Setup
Fig ure 83
The following table describes the labels in this screen.
Table 34 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Router Discovery Setup
L ABEL
Interface
Flags
Minimum Interval
Maximum Interval
Chapter 8 Basic Setting
DESC RIPT IO N
This field displays the time interval (in milliseconds) at which neighbor solicitations are re-sent for
this interface.
This field displays how long (in milliseconds) a neighbor is considered reachable for this interface.
in the
IPv6 C o nfig ura tio n
DESC RIPT IO N
Select the IPv6 interface you want to configure.
Select the
Ma na g e d C o nfig Fla g
configuration" flag (the M flag) to 1 in IPv6 router advertisements, which means IPv6 hosts
use DHCPv6 to obtain IPv6 stateful addresses. De-select the option to set the flag to 0 and
the host will not use DHCPv6 to obtain IPv6 stateful addresses.
Select the
O the r C o nfig Fla g
configuration" flag (the O flag) to 1 in IPv6 router advertisements, which means IPv6 hosts
use DHCPv6 to obtain additional configuration settings, such as DNS information. De-select
the option to set the flag to 0 and the host will not use DHCPv6 to obtain additional
configuration settings.
Specify the minimum time interval (from 3 to 1350 seconds) at which the Switch sends
router advertisements for this interface.
Note: The minimum time interval cannot be greater than three-quarters of the
maximum time interval.
Specify the maximum time interval (from 4 to 1800 seconds) at which the Switch sends
router advertisements for this interface.
XS3800-28 User's Guide
screen to display the screen as shown next.
option to have the Switch set the "managed address
option to have the Switch set the "Other stateful
117
IPv6 Ro ute r