Running Annex Manager; Figure 1-1. Initialization Window - Bay Networks Manager User Manual

Chapter 1 Installing Annex Manager

Running Annex Manager

Annex Manager User Guide
1-12
You can run Annex Manager after you install the application and set
environment variables:
Type at the shell prompt.
gui_am
If you did not set a path, type
or type the full path.
is a script file that sets environment variables and runs
gui_am
Annex Manager's
invoke
gui_am_exe
A window appears that informs you about the initialization process.

Figure 1-1. Initialization Window

When the initialization process ends, this window disappears and you can
use Annex Manager.
Part 1
cd <install directory>/bin
executable. You should not
gui_am_exe
from the command line.
Annex Manager Basics
and then type
gui_am