Displaying The Reset Window - Bay Networks Manager User Manual

Chapter 16 Booting and Resetting Annexes
Displaying the
Window
Annex Manager User Guide
16-10

Displaying the Reset Window

The command originates in the Configure menu. To display this
Reset
window:
1. Create an Annex list in the main window.
For more information about Annex lists, see Chapter 4.
2. Select one or more Annexes from the list.
3. Hold the mouse button on the Configure menu, choose
and release the mouse button.
The window appears (see
Reset
The following example shows the
Figure 16-3. Reset Window
Part 4 Control and Status Commands
Figure 16-3).
window.
Reset
Reset