Chapter 16
Booting and Resetting Annexes
Displaying the
Window
Annex Manager User Guide
16-2
Displaying the Boot Window
The
command originates in the Configure menu. To display the
Boot
window:
1.
Create an Annex list in the main window.
For more information about Annex lists, see Chapter 4.
2.
Select one or more Annexes from the list.
3.
Hold the mouse button on the Configure menu, choose
release the mouse button.
The
window appears (see
Boot
The example below shows the
Figure 16-1. Boot Window
Part 4
Control and Status Commands
Figure
16-1).
window for a single Annex.
Boot
and
Boot