Setup Mode Basics - Bay Networks Manager User Manual

A
nnex Manager's Setup mode appears when you first use Annex
Manager software. This mode allows you to configure one or more
Annexes by setting the most commonly used parameters.
The Setup mode limits your access to Annex Manager commands.
If you use this mode, you can use only the
,
Annex List Boot
,
Reset SNMP Information
commands. Commands that are unavailable appear in grey text.
You can use the menu's
Customize mode. Customize mode lets you set individual Annex
parameters and provides access to all main menu commands. For
detailed information about using Customize mode, see Part 3.
A series of Setup mode windows allows you to change Annex settings.
Each window groups related settings and provides access to fields based
on your previous selections. You can select:
• The window to change the most commonly used Annex
General
settings. If you press this window's
window allows you to view and change additional Annex
settings.
• The
Async Ports
press
Edit Port
configurations.
• The
Call Defaults
parameters for ISDN Primary Rate Annexes.

Setup Mode Basics

, ,
Broadcast Discover Annexes
,
Confirm Auto Reset
heading to switch from Setup to
Mode
window to select one or more ports. When you
here, you can change port and modem
window to set the most commonly-used
Annex Manager User Guide
Chapter 5
,
Open Annex List Save
,
PRI Internal Modems,
, and all
Status
button, a second
More
5-1