Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
Configuration memory names are restricted to alphanumeric characters.
Figure 6-47 Edit->Memories Screen
6.2.25.1 Edit->Memories->Recall Screen
The Edit->Memories->Recall screen (shown in Figure 6-48) displays all of the configuration
memories that are stored on the modem. A specific configuration memory can be made
active by selecting the associated Recall button. The Delete button can be used to delete
a configuration memory.
Figure 6-48 Edit->Memories->Recall Screen
6.2.25.2 Edit->Memories->Recall->Advanced Reversionary Control Screen
The Edit->Memories->Recall->Advanced screen (shown in Figure 6-49) supports a
method for recovering a remote modem from a failure during a change to the modem's
configuration. In essence, reversionary control works in a similar way to the Cisco Reload
command, where a known trusted configuration is loaded after a defined timeout period in
the event that the reload operation is not cancelled by the operator in a timely manner after
completing the necessary configuration changes.
6-66
Advertisement
Table of Contents
